Pneumatic Joining Machines

Part # F04076
Support Table for U300

Part # U300
The U-300 is a bench-top, frame joining machine and the most popular model of custom framer, sign and graphic shops. It is compact, well constructed, and built for many years of trouble free operation. The design of the U-300 allows the operator to set the front and back measuring stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails are driven or stacked anywhere along the frame joint. The V-Nail insertion is actuated through the use of a pneumatic pedal.

Part # 300P
Nails can be driven in three positions without moving the frame or clamping system
Heavy duty production model compare our construction!
Will drive 5 sizes of V-Shaped Wedges (5MM-7MM-10MM-12MM-15MM)
Adjustable hold down for driving into the hardest of woods easily
Soft clamp pneumatics for a tight corner on all your mouldings
Dial Indicator/Tilt & Angle adjustable fence to compensate for mis-cut or mis-milled profiles
Easy adjustment of

PART # U400
The U-400 could be operated from the front or back and has a single stage pneumatic foot pedal that activates the Horizontal Clamp, securing moulding during the joining process.
Former Model Reference - VN144

Part # U500
AMP U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining.
Former Model Reference - VN4MP

Part # U600
The AMP U-600 is the most advanced frame joining machine commonly used for picture framing, woodworking (Door Trim), canvas stretcher bars and mirror frame joining.
Former Model Reference - VN4MC